Kurth - KE3600

xDSL Multitester with GbE-Port and VDSL2-Vectoring

• Intuitive "One-Click-Operation" and clear"At-a-glance-display"
• ADSL-VDSL2 and VDSL2 Vectoring (ITU-T G.993.5) in one unit
• Supports Annex A/B/J/L/M with xDSL autodetection
• GbE Port for advanced Ethernet testing
• Dial-in Test, Ping and Trace Route with IPv4 (IPv6 ready)
• Modem, Router and Terminal Mode shows all important xDL parameters
• FTP Up/Download, HTTP-Download Tests up to 500 MBit/s
• Large, sunlight-readable color TFT with high resolution
• High performance LiPo battery and expendable memory
• Including software for managing and creating protocols

Data
Standards compliance

• ADSL1/2/2+
  • ITU-T G.992.5 (ADSL2+ incl. Annex A, B, J, M)
  • ITU-T G.992.3 (ADSL2 incl. Annex A, B, J, L)
  • ITU-T G.992.2 (G.Lite incl. Annex A, B, J)
  • ITU-T G.992.1 (G.DMT incl. Annex A, B, J)
  • ATIS/ANSI T1.413 Issue 2
  • IEEE 802.3ah (PTM)
  • ITU-T G.998.1/2/3 (Bonding)*
• VDSL2
  
  • ITU-T G.993.2 Annex A, B
  • ITU-T G.993.5 Vectoring
  • Profiles: 8a/b/c/d, 12a/b, 17a, 30a
  • Band Plan: 997, 998, US0
  • IEEE 802.3ah (PTM)
  • ITU-T G.998.1/2/3 (Bonding)*
• DSL parameters
  • Maximum attainable bit rates
  • Actual achieved bit rates
  • Vendor code, revision
  • Actual bonded achieved rates
  • Interleave depth
  • Latency modes: fast, interleaved
  • Interleave delay
  • Data modes: ATM, PTM
  • Capacity (%)
  • Bit swapping
  • Signal-to-noise ratio (SNR) margin
  • INP
  • Output power
  • G.INP
  • Attenuation
  • Vectoring
  • Bits/bin
  • Modes: PTM, ATM, LOS, FEC, CRC, HEC
  • Attenuation/bin (Hlog/bin)
  • LATN per band
  • QLN/bin
  • SNR/bin
  • SATN per band
• Test interfaces
  • VDSL2, ADSL 1/2/2+
  • Ethernet 10/100 MBit/s Management Port
  • Ethernet 10/100/1000 MBit/s Test Port
• Encapsulation methods
  • RFC 2684 supporting bridged Ethernet (IPoE) PPPoE (RFC 2516)
  • IPoA (RFC 1577) PPPoA/LLC and PPPoA/VC-MUX (RFC 2364)
• Operating modes
  • DSL Terminate
  • Modem Replacement (DSL to Ethernet) Pass Through
  • Ethernet Terminate
  • Ethernet/Ethernet Pass Through
• Login format
  • User name and password using PAP/CHAP
• Connectivity support
  • LAN/WAN status VLAN ID, VLAN tagging
  • DNS, gateway VPI/VCI
  • DHCP client/server, DHCP vendor class  IP release
  • NAT Signal Strength
• Ping test
  • Ping destination: Gateway, IP adress or URL
  • Number of pings: 1 to 99
  • Packet size: 32 to 1200 bytes (default is 32)
  • Timeout: 1 to 10 seconds
  • Results: Packets sent/received, average round-trip delay (ms)
•  Traceroute test
  • Traceroute destination: Gateway, IP adress or URL
  • Timeout: In seconds, default is 1 s, maximum is 10 s
  • Packet size: 32 bytes
  • Number of hops: 1 bis 32 1 to 32 (default is 30)
  • Results: Indicates IP address of hop and round-trip time in milliseconds (ms)
• FTP/HTTP speed test
  • Address: IP or URL
  • Direction: Upload and/or download
  • Results: Time, kB transferred, speed in kbit/s
  • Bookmarks: User-definable
• Software options
  • Web Access*
  • IPTV tests*
  • DSLexpert (diagnostic suite)*
  • VoIP tests* (Bluetooth adapter + wired headset)
• Interface options
  • xDSL Bonding Interface*
  • SHDSL 8-Wire-Interface*
  • KECT3 Coppertest Interface for Line Qualification with DMM
  • TDR finds and localices cable faults (only with KECT3)
  • SFP-Port for Copper, Fiber (second GbE-Port) or GPON (ONT), Inserts optional
  • ISDN Uk0  / S0  / POTS Interface
  • S2M  Interface*

 *further information on request

• General Data
  • Display
  • 3.5 " TFT-Display, RGB 240 x 320
• Power Supply
  • Built-in LiPo battery < 4 hours in full test mode, charging time < 6 hours
• Size
  • 23 x 11/9 x 7 cm
• Weight
  • 850 g
• Housing
  • High impact resistant ABS with drop protection

Item code: 160800